BYS SERIES EXPLOSION PROOF FLUORESCENT LIGHT FITTINGS

BYS SERIES EXPLOSION PROOF FLUORESCENT LIGHT FITTINGS

Enclosure is Injected of Polycarbonate Alloy with High Strength, Impact Resistance, Corrosion Resistance, Heat Resistance and Cold Resistance;
Lamp Cover is Injected of Polycarbonate with Good Lighting Transmittance and Impact Resistance;
Light Fitting is Designed in Double Sealing Structure with Good Water Proof and Dust Proof;
Reflector is Designed in Special Double Parabolic to Improve Light Efficiency Greatly;
Enclosure and Lamp Cover Adopt Plug-In Structure are Easy to Open and Close Tightly;

Product Details


Application

Designed for Explosive Atmospheres Zone 1 and Zone 2;

Designed for Combustible Dust Zone 21 and Zone 22;

Designed for IIA, IIB and IIC Groups Explosive Atmospheres;

Designed for Temperature Classifications T1~T4;

Designed for Explosive Hazardous Locations Such as Oil Refinery, Storage,Chemical, Pharmaceuticals, Textile, Painting, Military Industries, Etc.

Model Code

Ordering References

The Lamp is Included Inside When Delivery.

Only One Tube Works Under Emergency Conditions.

The Pendant Type is Side Entry Type. Please Indicate When Need Top Inlet.

For Examples: If Need the Top Inlet Pendant Type BYS Explosion Proof Corrosion Resistance Polyester Fluorescent Fitting, 2X28W, with Emergency Unit, the Model Shall Be: BYS-2X28g2J.

Selection Table

Technical Parameters

Compliance With: GB 3836.1, GB 3836.2, GB 3836.3, GB 3836.9, GB 12476.1, GB12476.5

IEC60079-0, IEC60079-1, IEC60079-7, IEC60079-18, IEC61241-0, IEC61241-1

Explosion-proof Mark: Ex d e mb IICT4 Gb / Ex tD A21 IP66 T80℃

Rated Voltage: Fluorescent Tube AC220V, 50/60Hz; LED AC100~240V 50/60Hz

Lamp:T8 Bi-Pin Fluorescent Tube (1X36W,2X36W) G13 Lamp Holder with Electronic Ballast

           T5 Bi-Pin Fluorescent Tube (1X28W, 2X28W) G5 Lamp Holder with Electronic Ballast

           T8 Bi-Pin LED Tube (1X18W,2X18W) G13 Lamp Holder

Ingress Protection: IP66

Corrosion Resistance: WF2

Cable Entries: M25 X 1.25 (Cable Laying Wire, Standard Equipment)

                          G3/4" (Steel Pipe or Flexible Coupling Laying Wire, Customized Equipment)

Cable Outer Diameters: Φ9Mm~Φ14mm

Battery Charging Time: ≤24h

Emergency Starting Time: ≤0.25s

Emergency Lighting Duration: ≥90min

Features

Enclosure is Injected of Polycarbonate Alloy with High Strength, Impact Resistance, Corrosion Resistance, Heat Resistance and Cold Resistance;

Lamp Cover is Injected of Polycarbonate with Good Lighting Transmittance and Impact Resistance;

Light Fitting is Designed in Double Sealing Structure with Good Water Proof and Dust Proof;

Reflector is Designed in Special Double Parabolic to Improve Light Efficiency Greatly;

Enclosure and Lamp Cover Adopt Plug-In Structure are Easy to Open and Close Tightly;

With Clamping-Type Terminals, Just Need to Open Cover, and Then Connect Wire;

Name Brand Fluorescent Tubes Inside with Long Service Life and High Light Efficiency;

Built in Exclusive Explosion Proof Electronic Ballast;

Built-In Disconnecting Switch and De-Energizing When Open Cover to Assure the Safe Operation;

Lighting with Emergency Unit Will Automatically Shift to Emergency Lighting Status When Normal Power is Failed;

Special Designed over Charging and over Discharging Circuit Inside Emergency Unit;

Steel Pipe or Cable Wiring.

Dimensions&Photometry

Outline&Mounting Dimensions



VIEW MORE

Related Projects

BPY SERIES EXPLOSION PROOF FLUORESCENT L

Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting; Hig...

BZD130 LED Explosion Proof Lighting

Enclosure is Die Casted of High-Strength Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot...

BZD133 Explosion Proof LED

Enclosure is Die Casted of High-Strength Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot...

CONTACT US

Interested in our products or need advice?

If you have any further questions or queries please do not hesitate to get in touch.