BYD705 SERIES EXPLOSION PROOF FLUORESCENT LIGHT FITTINGS

BYD705 SERIES EXPLOSION PROOF FLUORESCENT LIGHT FITTINGS

Designed for Explosive Atmospheres Zone 1 and Zone 2;
Designed for Combustible Dust Zone 21 and Zone 22;
Designed for IIA, IIB and IIC Groups Explosive Atmospheres;
Designed for Temperature Classifications T1~T6/T4;
Designed for the Damp Sites with High Protection Level Demand;
Designed for Explosive Hazardous Locations Such as Oil Refinery, Storage, Chemical, Pharmaceuticals, Military Industries, Etc.

Product Details


Application

Designed for Explosive Atmospheres Zone 1 and Zone 2;

Designed for Combustible Dust Zone 21 and Zone 22;

Designed for IIA, IIB and IIC Groups Explosive Atmospheres;

Designed for Temperature Classifications T1~T6/T4;

Designed for the Damp Sites with High Protection Level Demand;

Designed for Explosive Hazardous Locations Such as Oil Refinery, Storage, Chemical, Pharmaceuticals, Military Industries, Etc.

Model Code

 

Ordering References

The Lamp is Included Inside When Delivery;

Only One Tube Works Under Emergency Conditions;

For Example: If Need Pendant Type BYD705 Explosion Proof Corrosion Resistance Polyester Fluorescent Light Fitting 2X28W Tubes, Side Inlet, with Emergency Unit, the Model Shall Be: BYD705-2X28g1J.

Selection Table

 

Technical Parameters

Compliance with: GB3836.1, GB3836.2, GB3836.3, GB3836.9, GB7000.1, GB12476.1, GB12476.5

IEC 60079-0, IEC 60079-1, IEC60079-7, IEC 60079-18, IEC 61241-0, IEC 61241-1

Ex-Proof Mark: Ex d e mb IIC T4 Gb / Ex tD A21 IP66 T80℃

Rated Voltage: Fluorescent Tube AC220V, 50Hz; LED AC100~240V 50/60Hz

Ingress Protection: IP66;

Corrosion Resistance: WF2;

Ambient Temperature: -40℃≤Ta≤+40℃

Cable Entries: M25 X 1.25 (Cable Laying Wire, Standard Equipment)

G3/4" (Steel Pipe or Flexible Coupling Laying Wire, Customized Equipment)

Cable Outer Diameters: Φ9mm~Φ14mm;

Emergency Parameters:Battery Charging Time: ≤24h;

Emergency Starting Time: ≤0.25s

Emergency Lighting Duration: ≥90min.

Features

Enclosure is Molded of SMC Glass Fiber Reinforced Polyester (GRP) with Benefits of High Strength, Impact Resistance and Corrosion Resistance;

Lamp Shade is Injected of Polycarbonate with Benefits F High Light Transmittance and Impact Resistance;

Light Fitting Adopts Labyrinth Seal Structure with the Performance of Strong Water Resistance and Dust Resistance;

Famous Brand Fluorescent Tube with Long Service Life and High Light Efficiency;

Exclusive Explosion Proof Ballast According to the Tube Type;

Adopt Specified Explosion Proof Lamp Holder;

Light Fitting are of Mechanical Interlock Hold-Down Gear and Automatic Power Failure. When Open, It Cuts Off the Lighting and Emergency Power Supply. When Close, Lock the Seal an Automatic Transmission.

With Convenient Locking Structure, Opened or Closed the Transparent Cover Can be Quickly According to Indication;

Lighting Fixture with Emergency Unit Will Automatically Shift to Emergency Lighting Status When Normal Power is Failed;

Special Designed over Charging and over Discharging Circuit Inside Emergency Unit;

Steel Pipe or Cable Wiring.



VIEW MORE

Related Projects

BPY SERIES EXPLOSION PROOF FLUORESCENT L

Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting; Hig...

BZD130 LED Explosion Proof Lighting

Enclosure is Die Casted of High-Strength Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot...

BZD133 Explosion Proof LED

Enclosure is Die Casted of High-Strength Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot...

CONTACT US

Interested in our products or need advice?

If you have any further questions or queries please do not hesitate to get in touch.