CCd92 Series Explosion Proof Light Fittings

CCd92 Series Explosion Proof Light Fittings

Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting;
Light Fitting Adopts Thread Spigot and Cementing Compound Explosion Proof Structure with Good Explosion Proof Performance;
Cable Entry is Specially Designed of Double Sealing Clamp Structure to Ensure Its Reliability and Ingress Protection;

Product Details


Application

Designed for Explosive Atmospheres Zone 1 and Zone 2;

Designed for Combustible Dust Zone 21 and Zone 22;

Designed for IIA, IIB and IIC Groups Explosive Atmospheres;

Designed for Temperature Classifications T1~T4/T3;

Lamp: HPM, HPS and MH;

Designed for Explosive Hazardous Locations Such as Oil Refinery, Storage, Chemical, Pharmaceuticals, Military Industries, Etc.

ATEX Number: LCIE 14 ATEX 3040 X

IECEx Number: IECEx LCIE 14.0034X

Ordering References

While Equipped with HPS, HPM, MH Light Source, Light Fittings are Delivered with Built-In Ballast, but No Lamps;

The Gas Discharge Lamp Light Source is Self Equipped by the Users, and It is Suggested to Choose YAMING and PHILPS Brand.

The Conventional Products are Not Equipped with a Capacitor Compensator. If Need, Please Note When Place an Order.

For Example: If Need CCd92 Explosion Proof Light Fittings with HPS 100W and Pendant Type, the Model Shall be “CCd92-N100g”.

 

Selection Table

 

Technical Parameters

Compliance With: GB 3836.1, GB 3836.2, GB12476.1, GB12476.5, IEC60079-0, IEC60079-1, IEC 61241-0, IEC 61241-1;

Rated Voltage: AC 220V, 50Hz

Ingress Protection: IP66;

Corrosion Resistance: WF2

Cable Entry: G3/4";

Cable Outer Diameters: Φ9mm~Φ14mm;

 

Features

Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting;

Light Fitting Adopts Thread Spigot and Cementing Compound Explosion Proof Structure with Good Explosion Proof Performance;

Cable Entry is Specially Designed of Double Sealing Clamp Structure to Ensure Its Reliability and Ingress Protection;

Glass Cover, Enclosure Rings and Clamping Rings are with Special Cementing Treatment by Expose Resin;

Integrated Design, Lamp and Electrical Cavity are Completely Separated from Electrical Connection Which Adopts Special Conduit;

Good Dissipation Ensures That Heat from Lamp and Electric Work Can be Transmitted and Dispatched Through Enclosure;

Optimized Photometry Design as of High Purity Aluminum Anodic Oxidation Reflector with High Reflectivity to Improve the Light Efficiency;

Glass Cover with Several Square Ribs Adopts Anti-Glare to Reduce Glare and Light Pollution;

Special Sealing Structure Ensures Ingress Protection IP66;

Exposed Fasteners are of Stainless Steel with High Corrosion Resistance;

Steel-Pipe Laying Wire.



VIEW MORE

Related Projects

BPY SERIES EXPLOSION PROOF FLUORESCENT L

Enclosure is Die Casted of Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot Blasting; Hig...

BZD130 LED Explosion Proof Lighting

Enclosure is Die Casted of High-Strength Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot...

BZD133 Explosion Proof LED

Enclosure is Die Casted of High-Strength Aluminum Alloy with High Voltage Electrostatic Powder Coated Surface After Shot...

CONTACT US

Interested in our products or need advice?

If you have any further questions or queries please do not hesitate to get in touch.